Installing The Berkey Sight Glass Spigot

wvspigotparts.jpg 

Remove the Sight Glass spigot from its packaging and make sure you have allof the parts.

  • Remove everything from the spigot except one washer.
  • Insert the threaded nipple into the hole in the bottom of the Berkey container.
  • Slip the second washer over the threaded nipple on the inside of the container.
  • Screw the nut onto the spigot and tighten hand tight

 

 sighttight.jpg  
  • Turn the spigot to the position shown and make sure the nut is hand tight.
  • While holding the nut from spinning, turn the spigot clockwise to the upright position.
 sightglasstt.jpg
  • Position after turning spigot.
   The Sight Glass spigot is now tight and ready use.